CRUSHSTATION SIGNAL CUTS OUT

This topic is empty.

Viewing 1 reply thread

Author

Posts
- October 23, 2015 at 11:17 pm #112969
  folkboy
  Participant
  I have 3 H9 and 4 stomboxs all eventide.
  
  crushstation solved my overdrive source.
  
  but its algorithm has some problems.
  
  I need a long sustain, but it sounds disapear end of small signal, like a cheap digital stombox.
  
  I am waiting improved algorithm.
  
  I think most of users has same complaint.
  
  Any one solve it by user setting?
- October 24, 2015 at 6:04 pm #141267
  starkjo
  Participant
  Regarding the sound “disappearing” – have you tried to dial the SAG knob all the way down to 0?
  - October 25, 2015 at 12:34 pm #141270
    folkboy
    Participant
    starkjo wrote:
    
    Regarding the sound “disappearing” – have you tried to dial the SAG knob all the way down to 0?
    
    I tried. but it was same.
    
    I mean that H9 did not catch small signal at crushstation.
    
    I tweaked input gain, but it has same result. It seems that crushstation requires update.
  - October 26, 2015 at 7:09 pm #141282
    wedelich
    Moderator
    Eventide Staff
    folkboy wrote:
    
    starkjo wrote:
    
    Regarding the sound "disappearing" – have you tried to dial the SAG knob all the way down to 0?
    
    I tried. but it was same.
    
    I mean that H9 did not catch small signal at crushstation.
    
    I tweaked input gain, but it has same result. It seems that crushstation requires update.
    
    Have you tried turning up the sustain knob (Pre or Post), and turning off the Gate? SAG will have to be at 0 or very small.
  - November 2, 2015 at 3:22 pm #141402
    folkboy
    Participant
    wedelich wrote:
    
    folkboy wrote:
    
    starkjo wrote:
    
    Regarding the sound “disappearing” – have you tried to dial the SAG knob all the way down to 0?
    
    I tried. but it was same.
    
    I mean that H9 did not catch small signal at crushstation.
    
    I tweaked input gain, but it has same result. It seems that crushstation requires update.
    
    Have you tried turning up the sustain knob (Pre or Post), and turning off the Gate? SAG will have to be at 0 or very small.
    
    Thanks Eventide staff.
    
    to turning off the Gate is a solution.
    
    Thank agian. why don’t you describe it on the manual? haha
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.