Octavox settings for Ballerina

This topic is empty.

Viewing 3 reply threads

Author

Posts
- February 15, 2016 at 5:56 pm #113262
  robhicks666
  Participant
  OK, I know this is probably a cliche but what the hell, you can’t get Eventide software/kit without trying to sound like Steve Vai for once in your life.
  
  Wondering if anyone has attempted to set up Octavox for the Steve Vai Ballerina patch. Wondering what the settings might be.
  
  Any help would be grately appreciated.
  
  Rob
- February 15, 2016 at 6:18 pm #142571
  tlongabaugh
  Moderator
  Eventide Staff
  Hi Rob-
  
  You should be able to get close with two voices enabled: One voice panned hard left to 900 cents and 180ms delay, and the other voice panned hard right at 500 cents and 360ms delay. Feedback 0% for both voices, and both intervals set to unison. The mix should be around 75%. Make sure you have "Pitch Tracking" set to Off, as you want to treat all incoming notes with the same amount of shift, and not restrict it to key.
  
  Let me know how that works out!
  
  Best,
  
  Tom
- February 16, 2016 at 11:51 am #142574
  robhicks666
  Participant
  Hey Tom, you nailed it! many thanks for your help on this one. The settings you suggested sound close to perfect, now it’s just down to me playing the tune! What was important here however, is that the settings you suggested enabled me to learn a little more about what’s actually going on with the signal and for that I’m very grateful indeed. Thanks again.
  
  Rob
- February 16, 2016 at 4:13 pm #142579
  tlongabaugh
  Moderator
  Eventide Staff
  Rob-
  
  Glad to help, enjoy the plug-in!
  
  -Tom
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.