ModFactor: Issue with Midi change after an update to 5.2 - Eventide Audio

ModFactor: Issue with Midi change after an update to 5.2

This topic is empty.

Viewing 2 reply threads

Author

Posts
- August 2, 2016 at 7:28 pm #113612
  sateven
  Hello,
  
  I just update my Mofactor in 5.2 and now I have the following issue;
  
  I use a Voodoo Lab Ground Control Midi controler, when it send a change to the ModFactor
  
  for a Factory Preset all works perfectly (as with my previous version of the MF os the 3.5).
  
  Now, when the controler sends a change for a Modified Preset, that preset is loaded but not made Active (the MF is in bypass mode). This is in particular the case with all my User Presets!
  
  In fact if a preset is modified and saved the problem appears.
  
  I carefully check the parameters but I probably miss something?
- August 2, 2016 at 7:31 pm #144002
  gkellum
  Participant
  sateven wrote:
  
  I carefully check the parameters but I probably miss something?
  
  Maybe, this wasn't always true, but nowadays, if you save a preset as bypassed, when you load a preset with a MIDI program change, it will load as bypassed. If you save it as active, it will load as active. So, please check and make sure that your user presets are saved as active. You should be able to see this in H9 Control. You could also just make a preset active and resave it directly on the ModFactor.
- August 3, 2016 at 4:00 pm #144016
  sateven
  Yes! Re saving in active mode works perfectly
  
  Thanks a lot
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.