Aux Switch

This topic is empty.

Viewing 2 reply threads

Author

Posts
- November 5, 2016 at 12:21 pm #113800
  stari
  Participant
  Hello,
  
  Is there a way to assing an aux swtich to always control the mix, for every preset? I would like to be able to click on the Aux, and have the Mix go to 75-100, and when unclicked it would go back down to 40-50%.
  
  Thanks,
- November 5, 2016 at 12:47 pm #144805
  gkellum
  Participant
  stari wrote:
  
  Is there a way to assing an aux swtich to always control the mix, for every preset? I would like to be able to click on the Aux, and have the Mix go to 75-100, and when unclicked it would go back down to 40-50%.
  
  In H9 Control if you click on Pedal in the bottom menubar and then Aux Switch Mappings, you'll see a pedal function 'Set parameter 1'. You can use this to have the aux switch toggle the mix value between two settings.
- November 5, 2016 at 3:34 pm #144806
  stari
  Participant
  Thank you! Now I’m wondering is there a way to use the Aux Switch to increase the mix to 100, but upon another click it would decrease it to the preset’s saved mix level?
  - November 6, 2016 at 12:26 am #144808
    gkellum
    Participant
    stari wrote:
    
    Thank you! Now I'm wondering is there a way to use the Aux Switch to increase the mix to 100, but upon another click it would decrease it to the preset's saved mix level?
    
    Some algorithms have a HotSwitch which allows you to toggle between two sets of preset values. An aux switch can be used to control that, but not every algorithm has that function. The HotSwitch could be used to do what you're describing though. It's available in all of the reverb (Space) algorithms as well as the algorithms that were developed for the H9.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.