Bypass mode per preset?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- April 19, 2017 at 3:36 pm #114123
  workingtitle
  Participant
  It would be great if the bypass mode could be stored per preset. In some presets I need the “DSP + FX” mode, so that the trails remain to be heard.
  
  In presets without trails or when the H9 is not used in a song, the “Relay Bypass” would be better to keep the latency low.
- May 25, 2019 at 10:05 am #151960
  workingtitle
  Participant
  I would like to bring this topic forward once again. I use my H9s every day and love them.
  
  But I still hope for this feature. It would be great if the bypass mode like “Kill Dry” could be an option in any preset.
  - May 28, 2019 at 3:43 pm #151972
    bohan
    Moderator
    Eventide Staff
    workingtitle wrote:
    
    I would like to bring this topic forward once again. I use my H9s every day and love them.
    
    But I still hope for this feature. It would be great if the bypass mode like "Kill Dry" could be an option in any preset.
    
    I believe "Kill Dry" is a feature that you can set on a preset by preset basis,
- May 28, 2019 at 3:50 pm #151973
  workingtitle
  Participant
  That’s right. “Kill Dry” can be set globally or via preset. That’s how I’d like it to be with “Bypass Mode”. Unfortunately, it can only be set globally.
- April 17, 2020 at 9:37 am #154614
  sumpe13
  Participant
  I would really like this feature as well! Is it possible to do this with CC Messages?
- April 22, 2020 at 4:48 pm #154676
  bohan
  Moderator
  Eventide Staff
  This is not impossible but it's just not smart or safe to add this feature. Relay bypass involves hardware (relay) movement, which should be avoided to occur many times, especially when presets are changed. Presets can be switched pretty fast, which may cause damage to the relay or unstability of the unit.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.