Little probleme with FC300 and timefactor

Home › Forums › Products › Stompboxes › Little probleme with FC300 and timefactor

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • November 13, 2017 at 6:36 pm #114458
      stefrobi
      Participant

        Hi,

         

        I’ve got a problem with a FC300 and the time factor….

        Exemple :

        swtich 1 = no effect bypass

        switch 3 = effect on.

         

        Press switch 1 = ok 

        Press switch 3 = The effect is on. no problem

        Re press 1 = works fine !

        But when I reswitch to 3, the effect is on but there’s no sound, I have to pess the switch 3 again to have the sound.

         

        I think the problem is coming from the FC300 but i’m not sure….

        Any suggestion ??

        Thanx for your help !

         

        StEf

         

      • November 14, 2017 at 4:08 pm #147651
        nickrose
        Moderator
        Eventide Staff

          You probably want to talk to Mr.Roland if you have issues with your FC-300.

          That said, I took a brief look at his UM, and I note that the switches can be defined as either MOMENTARY or LATCH. The TF usually wants a MOMENTARY, but the FC-300 defaults to LATCH. This is probably your problem.

           

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.