suggestions needed on the best way to do simultaneously tap tempo with my H9 and TF via FS3X

Home › Forums › Products › Stompboxes › suggestions needed on the best way to do simultaneously tap tempo with my H9 and TF via FS3X

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • June 6, 2018 at 12:25 pm #149427
      nickrose
      Moderator
      Eventide Staff

        You would want to use a TRS (stereo) Y adaptor. The switch would then control both units.

        But, you would be creating a ground loop, so might have to fiddle with the wiring to avoid hum.

        A switch will work better for tap than MIDI, which is inclined to be a little "rubbery."

         

         

      • June 6, 2018 at 12:44 pm #114773
        PaoloSMN
        Participant

          hello, My goal would be to control the tap tempo of: 

          a TimeFactor 

          H9 (hopefully delivered at my door today by the courier!)

           

          with a Digitech fs3x  footswitch already connected to the TF.

          I’ve seen similiar thread in the forum about doing tap tempo on multiple devices, suggesting to use a y splitter mono, but I assume that if I use a mono jack I wouldn’t be able to control the bank-down and repeat function of the TF (that I do with the other two buttons of the Digitech fs3x footswitch)

           

          would it be better if I use a midi connection and set the h9 as a midi slave and how could I do this only for the tap tempo function? otherwise could you suggest any other solution? thanks in advance!

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.