Automating The Emote/h9000

This topic is empty.

Viewing 2 reply threads

Author

Posts
- December 18, 2020 at 5:42 pm #116256
  sdd17
  Participant
  After hours of trying to get the h9000 to automate I stumbled on to this.
  
  I can now automate my Emote/h9000 via my midi controller!
  
  I thought I would document the procedure here in case anyone else is wanting to do this!
  
  I hope this explanation is clear!
  
  midi input to the h9000
  
  Will enable you to control the emote
  
  Via midi CC!
  
  Open a midi track in your daw and assign the output to the
  
  Midi port going into the h9000 and assign the input to the controller that will adjust your functions.
  
  Then set up quick controls on the midi track and assign cc controls to each one!
  
  Those quick controls can be assigned to the function controls in the emote.
  
  Once you assign a Cc to the quick control hit right click the function for mapping then hit the learn button and twist the controller knob until the function
  
  Starts to communicate!
  
  Then go to the algorithm you are working with and assign
  
  Whatever you want controlled to that function!
  
  PS:check your daws midi setup and see if you need to checklist the H9000
  
  That’s pretty much the deal.
  
  Opens up a universe of possibilities with the h9000!
- December 20, 2020 at 9:11 pm #156637
  joeydego
  Participant
  sdd17 wrote:
  
  After hours of trying to get the h9000 to automate I stumbled on to this.
  
  I can now automate my Emote/h9000 via my midi controller!
  
  I thought I would document the procedure here in case anyone else is wanting to do this!
  
  I hope this explanation is clear!
  
  midi input to the h9000
  
  Will enable you to control the emote
  
  Via midi CC!
  
  Open a midi track in your daw and assign the output to the
  
  Midi port going into the h9000 and assign the input to the controller that will adjust your functions.
  
  Then set up quick controls on the midi track and assign cc controls to each one!
  
  Those quick controls can be assigned to the function controls in the emote.
  
  Once you assign a Cc to the quick control hit right click the function for mapping then hit the learn button and twist the controller knob until the function
  
  Starts to communicate!
  
  Then go to the algorithm you are working with and assign
  
  Whatever you want controlled to that function!
  
  PS:check your daws midi setup and see if you need to checklist the H9000
  
  That’s pretty much the deal.
  
  Opens up a universe of possibilities with the h9000!
  
  Eventide this really would make a good sticky!
- December 21, 2020 at 3:52 am #156638
  John Baylies
  Participant
  I don't think we'll sticky this thread but I'll add it to the H9000 FAQ.
  
  We are open to critiques about the Emote User Manual and the H9000 User Guide. The Emote Manual was updated recently and the H9000 Guide will probably be updated in February.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.