Timefactor + Space MIDI clocks

brock wrote:

If all you’re after is MIDI Clock sync, then you don’t have to be concerned about MIDI Channels, Program or Control Change system settings. Otherwise, it gets more involved. I’m sure Joe has some slick videos up on the subject, but here is the basic layout: TimeFactor -> MIDI cable from OUT/THRU to Space MIDI IN

• System settings – MIDI:
• [OUTPUT] XMT
• MIDICLK OUT – ON

SPACE -> MIDI cable from OUT/THRU to 3rd Device MIDI IN (set device to receive MIDI Clock)

• System settings – MIDI:
• [OUTPUT] THRU
• MIDICLK IN – ON

3rd device -> set device to receive MIDI Clock

Thanks, I’ve set it up like you wrote. This gets the clock correctly to the third device, but the Space freezes in the process and I can’t turn it on anymore.

It only starts responding again when I unplug the MIDI cable.

Okay I’ve tried a couple of things, and it seems like a hardware issue of some sort.

Here’s how I connected it:

Timefactor MIDI OUT –> Space MIDI IN
Space MIDI OUT –> external-device MIDI IN

I have the Timefactor sending the MIDI clock, and the Space set to receive the clock and also send the MIDI it receives through.
My external device sets the clock correctly when I input it through the Tap Tempo on the Timefactor, but funnily enough the Space
freezes in the process. And I found out that I can unfreeze the Space when I unplug the MIDI cable from the Timefactor –> Space
connection and then the BPM is set correctly on the Space as well. At the moment the Space freezes, I cannot even use the footswitch
for bypassing it.

I can repeatedly make this happen by plugging the cable in, setting the tempo via Timefactor Tap Tempo, and unplugging the cable.

Update:

It turns out it works normally if I make the Space the clock master and have the MIDI chain as: Space –> Timefactor –> external. Weird.