Midi question

Home › Forums › Products › Rackmount › Midi question

Viewing 6 reply threads
  • Author
    Posts
    • February 18, 2023 at 10:49 am #169252
      vpajerski
      Participant

        Does anybody know how the midi thru operates?  I’m using a usb midi controller connected to the H9000 and I don’t see anything on the Midi thru connector.  Do I to have use the DIN ports?

      • February 20, 2023 at 5:54 am #169277
        Puppeteer
        Participant

          My assumption is that MIDI thru is a hardware thru, so only for use with the DIN ports.  I think there is an option in the setup screen to turn on USB Thru

        • February 20, 2023 at 8:02 am #169280
          vpajerski
          Participant

            Ok, thanks. I guess I’ll have to get an adapter then.

          • February 20, 2023 at 11:29 am #169284
            tbskoglund
            Keymaster
            Eventide Staff

              That’s correct, MIDI Thru is a hardware thru for the DIN MIDI input. There are no settings for USB MIDI Thru.

            • February 26, 2023 at 9:19 pm #169424
              Puppeteer
              Participant
                tbskoglund wrote:

                That’s correct, MIDI Thru is a hardware thru for the DIN MIDI input. There are no settings for USB MIDI Thru.

                 

                I thought that these settings below turn MIDI thru on for DIN, USBA and USBB

                MIDI Feedback

                Attachments:
                You must be logged in to view attached files.
              • February 27, 2023 at 1:12 am #169426
                bsfreq
                Participant
                  Puppeteer wrote:

                  I thought that these settings below turn MIDI thru on for DIN, USBA and USBB MIDI Feedback

                   

                  These are for the controller feedback, to mirror the state of your mapped controls to your controller software / motor faders, led encoders or any other controllers with visual feedback.

                • February 27, 2023 at 8:36 pm #169435
                  Puppeteer
                  Participant

                    Thanks for the clarification

                     

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.