H90 Phase Flip feature?

Home › Forums › Products › Stompboxes › H90 Phase Flip feature?

Tagged: 

Viewing 3 reply threads
  • Author
    Posts
    • March 2, 2023 at 8:00 am #169491
      streamcore8
      Participant

        Hello everyone!

         

        Didn’t find an info in the manual and faced the searchbar issue there, so hope the question is not too common.

        Planning to get H90 in order to replace a parallel mixer pedal with couple of modulation effect pedals I used to connect in parallel.

        Each of parallel lines also has a drive/fuzz in them, and I want to use them with H90 as Insert 1 and Insert 2.

        Wanted to ask, does H90 have a phase flip feature for preventing possible phase cancellations/volume drops, or maybe it maintained in other way somehow?

         

        Thank you in advance.

      • March 2, 2023 at 8:29 am #169492
        joecozzi
        Moderator
        Eventide Staff

          Hello streamcore8,

          Thank you for your question. Yes, the H90’s inserts have a polarity inverter switch. We talk about it in section 6.2.1 of the manual where we explain it can be used to calculate latencies of external digital pedals: https://cdn.eventideaudio.com/manuals/h90/1.1.2/content/edit-modes/routing.html#insert-routing

          • March 2, 2023 at 5:38 pm #169509
            streamcore8
            Participant

              Was so distracted by reading about routing options and missed this part, now I’m excited even more, huh

              Very much appreciated, joecozzi!

          • March 3, 2023 at 4:54 am #169515
            brock
            Participant

              I could see some potential uses for Phase Invert on the main signal lines, too.  ‘Course, that would also have the potential for unintended consequences.

              It’s probably a safer bet to simply jump the Inserts with short patch cables.

            • July 11, 2024 at 4:00 am #183693
              Rezzy777
              Participant

                If I may ask, why isn’t this phase switch available with Dual Mode (can’t find it anyway)?

                I am new to this so my apologies if this is such a n00b question 😉

            • Author
              Posts
            Viewing 3 reply threads
            • You must be logged in to reply to this topic.