kill dry in Program mode

Home › Forums › Products › Stompboxes › kill dry in Program mode

Viewing 3 reply threads
  • Author
    Posts
    • April 19, 2023 at 12:00 pm #170543
      nico___
      Participant

        seems not to work properly, setting the killdry mode on in pgm should bypass the global mode even if the latter is set to off?

         

        because I noticed that it has no effect when activated precisely in pgm

      • April 26, 2023 at 11:27 am #170667
        tbskoglund
        Keymaster
        Eventide Staff

          Can you be more specific with the issue you are having?

          If you set Program Kill Dry > On, then the dry signal will be removed from the Program mix. Bypassing the Program or turning the Mix level to 0 will result in no audio.

          If Global Kill Dry > On, and Program Kill Dry > Global, you should get the same results as above.

          Please provide some more information if this is not what you are experiencing, or if you are expecting something different.

        • April 26, 2023 at 1:57 pm #170673
          nico___
          Participant

            Immagine 2023-04-26 195455

             

            for example in this case the killdry doesn’t work ( the global is set to off), if i set the “on” on the PGM only it should kill the dry right?

             

            when i say “it doesn’t work” i mean i can still hear the dry and not only the wet signal

            • May 4, 2023 at 10:47 am #170981
              tbskoglund
              Keymaster
              Eventide Staff

                Thanks for providing more information about your setup. To be clear, the Program dry path is separate from the Preset A/B dry path. So, if Kill Dry is enabled for the Program, that will only kill the dry signal for the Program Mix/Bypass. The Preset A/B mix and bypass parameters will still have a dry signal present unless kill dry is enable for the Preset.

                If you’d like kill dry to be on for everything, set Global kill dry to ON and set Program/Preset A/B kill dry to Global. If you’d like a combination of kill dry on/off for your Program and Presets, this can be achieved by setting individual parameters to on/off/global.

                Let me know if that clears things up.

            • May 3, 2023 at 11:07 pm #170963
              Lodeman
              Participant

                Not working here as well.

            • Author
              Posts
            Viewing 3 reply threads
            • You must be logged in to reply to this topic.