How to assign A and B on off to exp 1 and 2?

Home › Forums › Products › Stompboxes › How to assign A and B on off to exp 1 and 2?

Viewing 2 reply threads
  • Author
    Posts
    • February 3, 2024 at 12:19 pm #177930
      Dweezil990
      Participant

        Hi seems like you cannot assign A and B on / off to exp 1 and 2.   I find it painful that to turn on/off A or B you have to press to little LED button hove the foot switch.   This is mental.

        i have an external two switch pedal (Xsonic Airstep) and want to assign a foot switch to A on/off and another to B on/off.

        <span style=”font-size: inherit;”>Can this be one?    In the global settings for A and B you can only select switches 1-6, not exp 1 or 2.</span>

        Major problem.

      • February 3, 2024 at 12:25 pm #177931
        Dweezil990
        Participant

          Or should I use the midi from the Airstep and use aux switch 1 and 2?   And send cc midi?

        • February 4, 2024 at 12:37 pm #177938
          tbskoglund
          Keymaster
          Eventide Staff

            I would suggest trying out Perform Mode. This allows you to customize the onboard footswitches for whatever use you like, included bypassing the individual presets: https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/play-modes/perform.html

            You can also use an external controller for this. Determine whether you’d like to use an aux switch or MIDI CC, and setup some global mappings. This is done most easily using H90 Control (see Global Control towards the bottom of the page): https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/h90-control/system.html

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.