H90 Cant PC and Bypass CC together. *BUG*

Home › Forums › Products › Stompboxes › H90 Cant PC and Bypass CC together. *BUG*

Viewing 7 reply threads
  • Author
    Posts
    • October 26, 2024 at 7:11 pm #185803
      lxm9096
      Participant

        MC6 PRO

         

        I can send a PC message of 50 for example and it loads

        I can send a CC of value = 0 “P ACT/BYP M” and it will deactivate. Send a value of 127 and it will activate.

        I cannot send both the above. It wont work. Even with a delay message in between from the morningstar controller. Am I missing something. I am pretty sure this is just a bug

      • October 26, 2024 at 7:17 pm #185804
        joecozzi
        Moderator
        Eventide Staff

          We are aware of this problem, but please report your request to support@eventideaudio.com so developers can better assess priorities. Thank you.

        • October 27, 2024 at 4:07 pm #185808
          lxm9096
          Participant

            Thank you. I have emailed support. I have tried everything I can think of here. Put the messages first in the chain. Delay to the max(1260ms) no changes.

          • November 4, 2024 at 1:33 pm #186006
            lxm9096
            Participant
              lxm9096 wrote:

              Thank you. I have emailed support. I have tried everything I can think of here. Put the messages first in the chain. Delay to the max(1260ms) no changes.

              I have been going back and fourth with support and they said

              “This is just how the MIDI was implemented on the H90, but it can be improved in the future”

              Not being able to load and change the bypass state of a patch is EXTREMELY basic behaviour for any pedal. Let alone the one I dropped over $1300 for. It’s broken… not implemented that way

            • February 26, 2025 at 1:20 am #188356
              lxm9096
              Participant

                Is there any update on this? Still driving me crazy. Causes havoc with my setup!

              • February 26, 2025 at 11:48 am #188376
                tbskoglund
                Keymaster
                Eventide Staff

                  Sorry to hear this is causing you issues. After looking into this issue further we have confirmed that a simultaneous MIDI PC+CC will work correctly on the previous firmware version 1.8.6. We are looking into a fix for this for a future update. If you’d like to downgrade your pedal, please email support@eventide.com and I can help you do that.

                • June 9, 2026 at 1:27 pm #195727
                  eleoh
                  Participant

                    Any update here? Kind of bonkers we can’t send PC + CC in the latest update.

                  • June 9, 2026 at 3:21 pm #195729
                    tbskoglund
                    Keymaster
                    Eventide Staff

                      Sorry, no updates at this time. I can notify you here when we have a fix for this.

                      • June 15, 2026 at 10:50 am #195783
                        eleoh
                        Participant

                          Please do. If you could, please escalate this as a high priority bug. I feel like the H90 is being severely limited due to having to choose between PC and CC commands. Getting the H90 back up to MIDI standards would ease a lot of frustration with the device.

                          Right now the only workaround is copying a preset and adjusting the parameters, which is a major nuisance as it quickly spirals into being unmanageable and untrackable. I should be able to find a sound I like and tweak the parameters via CC in the same MIDI command. I am using a Quad Cortex and the only MIDI commands I have access to are via scene changes, and this works for everything else in my chain just fine.

                          Thank you!

                    • Author
                      Posts
                    Viewing 7 reply threads
                    • You must be logged in to reply to this topic.