Algorithm Load Mutes FX Chain

Home › Forums › Products › Rackmount › Algorithm Load Mutes FX Chain

Viewing 2 reply threads
  • Author
    Posts
    • January 25, 2025 at 3:30 pm #187907
      gustebeast
      Participant

        When loading an algorithm, it mutes the entire FX chain briefly. This is problematic if you are using a single chain for multiple parallel audio signals, in my case 2 mics with 2 algorithms each.

        Would it be possible for the H9000 to mute only the signal chain impacted by an algorithm load?

        Attachments:
        You must be logged in to view attached files.
      • May 20, 2025 at 3:10 pm #190236
        gustebeast
        Participant

          Bump, would be curious to know if this is technically feasible on the H9000 hardware.

          This is particularly problematic for me because I use one of my FX chains for mixing all my instruments as well as providing 2 effect blocks for keys. If the keys player wants to change effects it mutes the entire mix.

          Attachments:
          You must be logged in to view attached files.
        • May 21, 2025 at 3:52 pm #190248
          tbskoglund
          Keymaster
          Eventide Staff

            Hi, sorry for not getting back to you when you originally posted this question. This may be doable but I’m not sure if we’d be able to get to this for a while.

            Do you ever use the Direct I/O router? You may be able to take advantage of this for routing some of your inputs without using an FX Chain, and this could be a workaround.

            If you provide some more info about your setup I may be able to help with that.

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.