Hello,

I would like to submit a feature request concerning Perform mode with algorithms A and B configured in series.

In mixer-based routing scenarios, proper gain staging and wet/dry management require dynamic control of the KillDry parameter depending on the active processing path.

Desired behavior:

When A = ON and B = ON (series routing), A should operate with KillDry = ON, while B remains KillDry = OFF.
When A = OFF (bypassed) and B = ON, B should automatically switch to KillDry = ON.
This effectively implies a conditional dependency between algorithm bypass state and KillDry status, allowing the unit to maintain a consistent wet-only signal path at the mixer level.

Currently, this requires manual parameter changes or external routing workarounds, which reduces usability in live or hybrid mixing environments.

Proposed improvement:

Introduce a conditional or state-linked parameter system, where KillDry can be automatically reassigned based on:

Algorithm bypass state (A/B)
Routing configuration (series/parallel)
Alternatively, allow user-defined parameter linking or logic-based modulation between A and B states.

This would significantly improve integration of the H90 in professional mixing workflows.

Regards, Gilles