- Eventide Audio

Home Forums Products Stompboxes Pedal Board for Eventide Stopboxes Reply To: Pedal Board for Eventide Stopboxes

#131179
King David
Member

Here is a little tip that may help some of you.  I was trying to make my power strip and wall warts as short as possible.  I wanted them all to fit under about 2.5" space.  That was hard to do.  I found some extension cords that had the low profile (go to the side rather than straight out.  I cut them to be much shorter (6" or so) and then replaced the outlet end with one from the hardware store.  That allowed me to make a little pig tail, so i could place multiple wall warts on the power strip and not have the wall warts sitting ontop of the power strip.