- Eventide Audio

Reply To: Dante and/or MADI setup with H9000

Home Forums Products Rackmount Dante and/or MADI setup with H9000 Reply To: Dante and/or MADI setup with H9000

#156951
zengomi
Participant
John Baylies wrote:

> I read somewhere that it’s a feature Eventide is considering implementing.

Indeed, but it’s a toughie. In the meantime, I believe you can just use a single ADAT cable to connect the H9000’s ADAT Input to its ADAT Output.

 

Thanks, John. Very interesting. I’m guessing the sample rate must be 48kHz. I’ve been using 96kHz for years and have a perhaps irrational resistance to 48. 😉