Some new info, and I think now that half of my USB ports are broken.
I’m running the latest 2.0 beta now, and found that the machine will boot with a USB device plugged into any of the ports. I did learn though that the wifi dongle would only be detected from the lower front panel USB port on the H9000. Weird.
I just did a test with the provided USB thumb drive, and here are the results:
- Plugged into front panel TOP USB socket: no response (NO orange light in the thumb drive, no nothing).
- Plugged into front panel BOTTOM socket: response (orange light + USB STORAGE CONNECTED).
- Plugged into back panel TOP socket: response (orange light + USB STORAGE CONNECTED).
- Plugged into back panel BOTTOM socket: no response (I DO get orange light here, but no further response).
Note how the two sockets that do not work have different behaviour. The front panel top socket doesn’t respond at all. The back panel bottom socket though DOES give me the orange light on the thumb drive, so the socket seems more alive.
I really hope this is software, but I’m afraid this is my hardware and the device has to be returned. Eventide, please advise.
Thanks, Robert
