- Eventide Audio

Home Forums Products Stompboxes H90 midi question Reply To: H90 midi question

#169045
brock
Participant

<p style=”text-align: left;”>With Act / Byp (M), you need to send CC#0 at a value of less than 64 for Bypass.  That is, any value between 0 and 63.</p>
<p style=”text-align: left;”><span style=”font-size: inherit;”>Any CC#0 value from 64 through 127 results in an Active state.  That way, you can use two switches with different values of CC#0 to control Active or Bypass.</span></p>
<p style=”text-align: left;”>It’s also possible to ‘punch in’ Active with a switch programmed for, say, CC#0 – 127 on press, and CC#0 – 0 on release.</p>