@gustebeast In Dante Controller, you can route any of the Dante card’s inputs to any of its outputs. For example, you could route input 32 to output 32. Then in Emote you can send audio out of an FX Chain to Dante Output 32, and receive it in a different FX Chain thru Dante Input 32.
You can take the H9000 on the road without a computer, and you don’t have to plug the Dante card into itself to get loopback functionality, but you’ll still need to have the Dante Card plugged into a router for it to start properly.
I once asked a Dante representative if they could make Dante cards fully boot without having to be connected to a LAN but they didn’t seem to be very interested.
