Aux Switch how-to question?

Home › Forums › Products › Stompboxes › Aux Switch how-to question?

  • This topic is empty.
Viewing 5 reply threads
  • Author
    Posts
    • August 1, 2014 at 4:48 am #111818
      KCStratman
      Participant

      To make three-switch aux switch boxes for my Stompboxes using three momentary pushbutton switches are they single SPST or SPDT and how do you configure the contacts of the three switches into the Tip and Ring lugs of the TRS jack for correct switching of the default Eventide setup for preset, bank down and tap, etc? I have all the parts and know how to solder, just  need a hookup diagram or description. Thanks! Really enjoy the forum so far, lots of great info!

    • August 1, 2014 at 5:13 pm #126417
      nickrose
      Moderator
      Eventide Staff

      I would suggest you just buy a Digitech FS300 (or look for the schematic online).

      You need two SPST and one either one DPST or another SPST and two diodes.

    • August 1, 2014 at 10:01 pm #126420
      rabiddiabetic13
      Member

      ,

    • August 1, 2014 at 10:04 pm #126421
      rabiddiabetic13
      Member

    • August 2, 2014 at 6:20 pm #126424
      nickrose
      Moderator
      Eventide Staff

      ,

      Looks good to me !

    • August 2, 2014 at 10:19 pm #137098
      KCStratman
      Participant

      Thanks everybody got it.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.