Barn3 OX9 not switching correctly - Eventide Audio

Barn3 OX9 not switching correctly

This topic is empty.

Viewing 2 reply threads

Author

Posts
- May 10, 2021 at 1:02 am #116486
  jayrmon
  Hello,
  
  I have had a Barn3 Ox9 with my H9 Max for a few years now. I use the left button to increment presets up and the right button to go down. All of the sudden my right button sets the H9 to bypass. Nothing has changed and I verified the config on my IOS App.
  
  Anyone have any idea what could be wrong or how to resolve this?
  
  Any help is greatly appreciated.
  
  thank you
- May 10, 2021 at 11:24 am #157805
  nickrose
  Moderator
  Eventide Staff
  It does sound as if the settings are confused. Even though you believe they are OK, I would suggest re-initializing the unit and then rebuild the settings.
- May 10, 2021 at 2:52 pm #157808
  bohan
  Moderator
  Eventide Staff
  https://static1.squarespace.com/static/539f0880e4b0e0318ea3192f/t/5940029fb8a79bde2d979ab5/1497367242457/OX9-Manual-2017.pdf
  
  Also make sure you didn't accidentally move the slide switch on the left of OX9
- May 11, 2021 at 9:40 pm #157835
  jayrmon
  bohan wrote:
  
  https://static1.squarespace.com/static/539f0880e4b0e0318ea3192f/t/5940029fb8a79bde2d979ab5/1497367242457/OX9-Manual-2017.pdf
  
  Also make sure you didn’t accidentally move the slide switch on the left of OX9
  
  Thanks. I think this was it. I just slid this switch back and forth and all is good now.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.