Quad Sidechain Compressor

Home Forums Products Vsig and Preset Development Quad Sidechain Compressor

Tagged: 

Viewing 2 reply threads
  • Author
    Posts
    • #116198
      John Baylies
      Moderator

      SIDECHAIN "in 1, 2, 3, 4" is feedforward, "out 1, 2, 3, 4" is feedback (post-MAKEUPGAIN & DRY/WET MIX), and "in 5, 6, 7, 8" is the external sidechain input.

      CUTS filter the sidechain signal.

      DRY/WET MIX is post-LOOKAHEAD.

      LINK BESIDE controls how much 1+3 (or 5+7) compresses 2 and 4, and how much 2+4 (or 6+8) compresses 1 and 3.

      LINK ACROSS controls how much 1 (or 5) compresses 3, 2 (or 6) compresses 4, 3 (or 7) compresses 1, and 4 (or 8) compresses 2.

      For natural sounding compression make sure LINK BESIDE is always >= LINK ACROSS.

      Outputs 5, 6, 7, and 8 are just inputs 5, 6, 7, and 8 passed through unprocessed.

      This is how I set up the Link knobs. haven't tested it yet but I think it'll work:

      Show More...

      Download attached:

      Show Less...
    • #159891
      Puppeteer
      Participant

      It seems the old downloads disappeared when the forums were upgraded.  Any chance we can get this download again?

    • #159902
      John Baylies
      Moderator

      https://etide.io/Oea7U

      IIRC I wasn’t a fan of how I set up the gain reduction meters, but I think “link across / beside” worked out well.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.