Setting up Timefactor and Modfactor in Stereo

Home › Forums › Products › Stompboxes › Setting up Timefactor and Modfactor in Stereo

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • February 19, 2013 at 2:14 pm #109606
      len
      Participant

      Hi guys!

      New to the forum here, probably a newbie question.

      How do I set up the Timefactor and Modfactor for stereo out, so for example, so that delay A goes to one amp and delay B to the other?

      Any help greatly appreciated- Thanks!!

      Huh?Geeked

    • February 19, 2013 at 4:05 pm #124305
      nickrose
      Moderator
      Eventide Staff

      Just plug in two output cables. They will spot this and configure themselves appropriately.

    • February 20, 2013 at 12:36 pm #124306
      len
      Participant

      Cool.  Thanks!

    • March 21, 2013 at 8:37 pm #124389
      jmusolino
      Participant

      On a related note, running PF->MF->TF in the effects loop – I'd like to find a way of running these mono into either of 2 amps (the front ends of each are running into a Radial A/B/Y switcher), depending on the one I have switched on. I tried the stereo approach, but that was unsuccessful for this purpose. Thanks!

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.