TF -program change not working

Home › Forums › Products › Stompboxes › TF -program change not working

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • January 16, 2009 at 9:01 am #106020
      BKK-OZ
      Participant

        Hiya, 

        I'm hoping someone here can help me.  I have set up my TF so that I can control it with my DAW (DP v6.01).  All of the controllers seem to be working ok, but I cannot get the TF to respond to program (patch) changes coming out of DP.  I am able to record a patch change (by recording the MIDI coming out of the TF into a MIDI track in DP) but when I play that track back, the TF sits there, ignoring the patch/program change request.

        I have checked the obvious – TF is set to receive the MIDI controllers, patch changes, etc.

         Any ideas?

        All help much appreciated.

        Cheers,

        BK

      • February 8, 2009 at 11:43 am #118261
        BKK-OZ
        Participant

          I fixed it – MIDI channels need to be set correctly on both the DAW and the TF, and the MIDI track needs to be record-enabled.

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.