TimeFactor Preset Naming Issues

Home › Forums › Products › Stompboxes › TimeFactor Preset Naming Issues

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • February 7, 2012 at 3:10 pm #108400
      ninjadave7
      Participant

      I recently updated my TF to V3, being super excited to start naming.  Something is eluding me though, I can't get it to work.  I put the bank into Save mode (holding down Encode knob till the banks blink) and then hold the right switch down.  I could hold it forever and nothing changes.  I re-checked my firmware version in the Sys Menu and i"m golden.  I pulled up FactLib and changed the preset name there and sent the info to the TF, rebooted even, but still nothing.  

      HELP?

    • February 7, 2012 at 4:41 pm #123103
      achaput
      Moderator

      Hello,

      Instead of holding down the Right Footswitch, try hitting it once.

    • February 7, 2012 at 5:00 pm #123107
      ninjadave7
      Participant

      I'll give that a shot.  Thanks!

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.