Hi everybody,
I connected my pedalswitcher via a MIDI cable to my H9.
The pedalswitcher loads (via presets) different pedal-combinations from the pedals on my board,
and simultaniously loads the preset on the H9 which belongs to the preset from my pedalswitcher.
From now on its pretty standard…
I have a lot of different pedal-combinations (so a lot of different presets on the pedalswitcher), what i like to do is the next thing:
Add another MIDI device (between my pedalswitcher and the H9) to load other presets on the H9 and let the pedalswitcher ‘untouched’.
For example:
I have a preset on my pedalswitcher which contains 2 overdrive pedals and chorus of the H9.
Now i need a little Delay of the H9 without changing presets on the pedalswitcher.
So i add another MIDI which loads the delay on the H9.
Is it possible?
And what MIDI pedal do you use?
The pedal needs a MIDI in and out.
I was thinking of the AMT FS-2 MIDI.
Let me hear what you think;)