Presets

Here is a fuzz preset on the heavier side of things. Activating the hotswitch will boost the output level enough for a lead. 9/7/2022

Before I sold off my Friedman BE-OD pedal I tried to make a preset as close as possible. I thought this was very close. I used a Les Paul R9 and Marshall 1974x to dial in the H9 to the Friedman Pedal.

You prolly guessed that this is another Klon type preset. It is similar to the one I built with EQCompressor but this one provides a little grit. Just a little though. Most people use their Klons and Klones as overdrives. They keep the gain low and turn the volume up until they smash the front of a tube amp (where most of the distortion is generated). 9/9/2022

'Queen' style drive.

Here's a MicroPog preset for the H9 with octave down and octave up (one sound at each end of the ribbon controller/exp pedal). The hotswitch adds fuzz so you have the option to use the preset with or without fuzz. Adjust to taste. 9/2/2022

Sound alike patch for the H9 Sculpt Algorithm. Les Paul Bridge > H9 > Hall Verb > Fender Bassman w/ Reverb the first 1/2, dry the second half. Adjust the sag and tone to your guitar's to get the correct amount of bite/sputter. It's close enough and cheaper than slashing the speakers on your amp and cranking it up to 10 :)

Tube scream 808

You prolly guessed that this is another tube screamer preset. It is similar to the one I built with EQCompressor but this one provides a little grit. Just a little though. Most people use tube screamers as overdrives. They keep the gain low and turn the volume up until they smash the front of a tube amp (where most of the distortion is generated). 9/9/2022