How to import a preset into Vsig?

Home › Forums › Products › Rackmount › How to import a preset into Vsig?

  • This topic is empty.
Viewing 6 reply threads
  • Author
    Posts
    • April 2, 2008 at 7:27 pm #105531
      Sunbreak Music
      Participant

      Hi Italo,
      I couldn't find this in the manual/help section I'm looking at.

      I'm finally getting into learning how to do this stuff, and figure that starting w/ and actual preset is the best method to get familiar.

      How do I retrieve that info?

      Thanks,
      Cass

    • April 2, 2008 at 7:30 pm #117296
      IDeangelis
      Member

       Hi Cass

      you need to refer to Vsigfile User manual, available on the Eventide website.

      best

      I 

    • April 10, 2008 at 10:48 pm #117348
      Sunbreak Music
      Participant

      Hi Italo,
      I've read the manual several times, have completed both tutorials, etc.., and I still don't know how to import a preset from my unit to vsig.

      I'm sure it's something completely simple, but I haven't figured it out. I'm determined to learn to program my H8000, but am not off to a very good start. 🙂

      Cass

    • April 11, 2008 at 8:54 am #128469
      IDeangelis
      Member

       Hi Cass

      page 5 of Vsigfile User Manual V2.0. You need a PC with a Serial port (COM) and a serial cable.

      Install Vsig, configure the serial port as described on page 7, download modules database from the unit as described on page 9.

      Then load any preset on the H8000 and click GET under the MIDI menu.

      all the best

      I 

      all the best

      I 

    • April 11, 2008 at 7:12 pm #128472
      J20056
      Participant

      There's one little subtlety though. That is that you must have opened a new file in order for the GET command to work. If you dont have a new blank file open, nothing happens.

    • April 11, 2008 at 7:23 pm #128473
      Sunbreak Music
      Participant

      I'm not sure that's a subtlety–it won't work if you don't do it! 🙂

      Thanks, gentlemen. For us non-programming types, maybe that should be changed in the manual.

      Cass

    • April 11, 2008 at 8:08 pm #128474
      IDeangelis
      Member

       When you launch VSIG a blank sigfile is being opened as default anyway.

      From Vsig manual, page 31:

      Get
      Get an algorithm from a remote system to the current document. This will delete the contents of the current document

      I 

  • Author
    Posts
Viewing 6 reply threads
  • You must be logged in to reply to this topic.