EVE/NET Level LEDs Not showing

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 27, 2013 at 1:09 am #110986
  sebastiank
  Participant
  I have recently re-setup my H8000FW, I have the audio / control working again, but the indicators on the EVE/NET do not show anything. The LEDs on the H8000FW front plate show the levels fine.
  
  The setup is:
  
  Mac Pro with Logic <-Firewire-> Motu Traveler <-AES/EBU port 1/2-> H8000FW
  
  The routing is the default Routing program 11 "AES4 A-B" but i tried other routing options with no change.
  
  The LEDs are fine since they all light up on startup.
  
  Any help appreciated
- June 27, 2013 at 4:11 pm #124589
  nickrose
  Moderator
  Eventide Staff
  What software version are you using ?
  
  Your post implies that they used to work, but now don't. If this is true, what changed ?
- June 28, 2013 at 12:05 am #124590
  sebastiank
  Participant
  Thanks for the reply.
  
  Version number is: 5.5
  
  The LEDs definitely used to work, I have a video where they show the levels right when i was set up before, and when the EVE starts up they all show fine. As soon as DSP B loads the LEDs all turn off
  
  In terms of whats changed: I just reconnected everything after moving house, the one thing that i did do was a SERVICE > CLEAR SETUP as i was finding it difficult to get the routing right and wanted to start from a clean setup.
  
  I dont know if this helps but the front of the harmonizer level LEDs are in columns 5 and 6 of the 8 wide LED indicators there. Does the EVE/NET only show channels 1-4? If so how do I change that.
- June 28, 2013 at 3:40 pm #135453
  nickrose
  Moderator
  Eventide Staff
  Looks like the 5-6 is your problem. On the LEVELS/METER page you can reverse 1-4/5-8 which will show channels 5-6 on the 4 Eve/Net meter leds. You probably had this set before and reset it when you did the clear setup.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.