H8000FW Problem on Start Up

This topic is empty.

Viewing 5 reply threads

Author

Posts
- March 12, 2015 at 9:15 pm #112414
  christopherperry
  Participant
  Ever since last night when I turned on the Eventide H8000FW I now get the following message:
  
  Problems found during startup
  
  See SETUP/info for details
  
  Press any key to continue.
  
  Is there a simple fix or does the unit need to be sent back to Eventide for servicing. I live in New Zealand.
- March 13, 2015 at 2:15 pm #127625
  nickrose
  Moderator
  Eventide Staff
  I think you should do what it tells you …. then come back with the info.
- March 13, 2015 at 6:29 pm #138531
  christopherperry
  Participant
  When I do that all is per usual until the next time I power up the machine. Then the same message appears. I am wondering if the battery needs replacing or something. It has been in there since 2007.
- March 13, 2015 at 6:53 pm #138532
  nickrose
  Moderator
  Eventide Staff
  This message only appears at power up.
  
  It clearly says "See SETUP/info for details."
  
  Have you done this, and if so, what did it say ? If not, uh, do it.
- March 14, 2015 at 12:13 am #138538
  christopherperry
  Participant
  Sorry I was pressing the SETUP key and then it went straight to the program. I have now gone to the info page in the SETUP and it says there is a bad checksum in internal memory. The following message shows:
  
  1) Problem in Internal Memory bad checksum
- March 14, 2015 at 12:20 am #138539
  christopherperry
  Participant
  I have sorted the problem. I had to go to service in the SETUP area and press fix internal. It powers up fine now.
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.