Orville analog routing problem

This topic is empty.

Viewing 3 reply threads

Author

Posts
- September 7, 2016 at 5:20 pm #113688
  duantro
  Participant
  Hi I have an Orville unit that I’ve been running in via digital, and am needing to route it via my interface analog I/o. No matter what routing I use, I can’t seem to get any signal. Any ideas?
- September 8, 2016 at 1:45 am #144323
  nickrose
  Moderator
  Eventide Staff
  You're not really giving me any information.
  
  I would suggest that you re-initialize the unit – this should default it to analog in, analog out. If it still does not pass analog, it probably needs looking at.
  - September 12, 2016 at 11:06 pm #144359
    duantro
    Participant
    nickrose wrote:
    
    You’re not really giving me any information.
    
    I would suggest that you re-initialize the unit – this should default it to analog in, analog out. If it still does not pass analog, it probably needs looking at.
    
    What additional info would help? I powered up with the 8 key help and selected the analog stereo in after a long hold on the program button.
    
    Still no analog signal coming in. Reselected the wordclock in as clock source. Any ideas?
- September 13, 2016 at 2:30 pm #144362
  nickrose
  Moderator
  Eventide Staff
  Sorry – sounds like it needs a service. Probably a power supply issue if none of the four analogs work. support@eventide.com
  - September 17, 2016 at 5:16 am #144408
    duantro
    Participant
    nickrose wrote:
    
    Sorry – sounds like it needs a service. Probably a power supply issue if none of the four analogs work. support@eventide.com
    
    Do analog inputs show up under input menus or dsp?
- September 17, 2016 at 12:46 pm #144410
  nickrose
  Moderator
  Eventide Staff
  Analog input gains show up on the LEVELS menus, and as routings under SETUP. See the UM for more info.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.