H9000 AES OUT PROBLEM

This topic is empty.

Viewing 2 reply threads

Author

Posts
- December 24, 2018 at 2:48 am #115122
  enable
  Participant
  Hey
  
  I have a strange problem with my AES OUT at the H9000.
  
  I use the H9000 as a soundcard and if i send a MONO signal out of the AES to my Grace design monitor controller my analyzer shows me that the signal is stereo.
  
  If i change the output to the adat my signal is Mono. No problems.
  
  This happen only at the AES output.
  
  I tryed the same with my universal audio Apollo to be sure that the cable dont have a problem but all fine.
  
  You can see the differences at the screenshots.
  
  this is always the same signal, one is the AES output and the other is the ADAT output.
  
  Any ideas?
  
  thanks and regards
  
  Brian
- January 9, 2019 at 12:44 am #150949
  enable
  Participant
  Hey
  - January 9, 2019 at 1:32 am #150950
    jbamberg
    Moderator
    Eventide Staff
    Sorry for the silence – we were all away over the holidays.
    
    Are you using the XLR outputs?
    
    This is a strange issue. We'll look into it.
- January 9, 2019 at 2:37 am #150951
  enable
  Participant
  Hey
  
  Happy new year.. 🙂
  
  Yes i use the XLR out.
  - January 9, 2019 at 8:00 pm #150957
    jbamberg
    Moderator
    Eventide Staff
    We've reproduced this issue. There is a 1-sample phase difference between the AES output channels. We will fix this in a firmware update soon.
    
    Thanks for reporting it.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.