DAW mode???

Home › Forums › Products › Rackmount › DAW mode???

Viewing 6 reply threads
  • Author
    Posts
    • July 19, 2021 at 3:15 am #116579
      joeydego
      Participant

        I know it was somewhat on the developing radar, but any chance this will make it into a firmware this year? Having fixed latency would sure make things easier. I dont care if its 7 minutes long, so long as its one number and I never have to ping again.

        This is the single most important feature I’d like to see added. New algos are always welcome, too!

      • July 19, 2021 at 3:19 pm #158260
        tbskoglund
        Keymaster
        Eventide Staff

          I can't promise a date for when this will be ready, but adding this feature is a high priority. Thanks for your patience. 

        • July 19, 2021 at 3:47 pm #158261
          joeydego
          Participant

            Thanks for your reply and attention! Super useful feature to implement.

          • October 26, 2021 at 4:25 pm #159777
            John Baylies
            Participant

              Late reply, but the current workaround for this is to always keep one algorithm in the bottom row of the FX Chain.

              We’ve also added some info about latency compensation to the documentation, which you may have already seen on the forums.

              https://cdn.eventideaudio.com/manuals/h9000/2.0/content/setup/DAWLatencyCompensation.html#variability

            • December 30, 2023 at 4:13 am #176958
              sugarhi
              Participant

                Any news on implementing this feature?

              • January 24, 2024 at 8:27 am #177608
                alexone
                Participant

                  +1’000’000

                • January 24, 2024 at 4:11 pm #177634
                  tbskoglund
                  Keymaster
                  Eventide Staff

                    Sorry, no updates or timeline for this at the moment, but it’s still on our radar.

                    Just to be clear, you can get a fixed latency for any FX Chain by always keeping an algorithm in the bottom slot. This will configure the FX Chain to always use the maximum latency, and you will not need to change your DAW’s latency compensation settings as long as you keep the algorithm in that bottom slot.

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.