H90 + overdrive

Home › Forums › Products › Stompboxes › H90 + overdrive

Viewing 1 reply thread
  • Author
    Posts
    • March 23, 2026 at 6:57 am #194958
      LordFlashheart
      Participant

        Hi.  I have my H90 setup in dual mode with a signal path as shown in the attached photo.  However when I engage the King Of Tone, the pedal has little to no effect in overdriving the overall tone and sounds very muted/muffled.  Any ideas why?

        Signal Path J.B. = Junction Box, KOT = King Of Tone, POB = Poly Blue Octave, KPP = Kemper Player Profiler, PCH = Strymon PCH

      • March 23, 2026 at 8:25 am #194959
        swatmark
        Participant

          I think it’s a routing problem.

          1/2 are your main stereo in/outs, and it looks like they’re getting mixed up with 3/4 when I trace through that diagram.

          If you look at the System input/output menu, you’ll see 1/2 as a stereo pair, and it will automatically handle mono or stereo from those connections.

          3 and 4 are two isolated ins and outs, but they can be used as a left-right stereo insert loop if you match up 3to3 in/out and 4to4 in/out.

          So your main stereo input and stereo output are best done on 1/2, and your FX loop via 3/4.

          That should help, I think.

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.