Home › Forums › Products › Rackmount › 2 amps and eventide 4000 dsp
How to conect 2 amps( Vox ac 30 & fender twin reverb) with eventide 4000 dsp.Would like to know how should connect cables from the back side of eventide. Should they be a stereo cables?? Thanx.
You should use mono cables. If your DSP4000has 1/4" jack outputs, use these, otherwise you will need XLR to mono jack cables, with pin 2 of the XLR connected to the tip of the jack, and pins 1,3 connected to the sleeve.