H8000FW adat slipping

Home › Forums › Products › Rackmount › H8000FW adat slipping

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • November 22, 2011 at 3:40 am #108202
      Sharkus

        I was recording and started hearing some snap crackle. Started searching around and see the h8000fw is reading slipping.

        Where do I start?

        So far I did all the reboots and even pulled all the lightpipes and the soundcard just to check connections. I didn't do any changes to anything. Just working correctly then not.

        Any ideas please, I get so sad when she's down.
        Thanks.

      • November 23, 2011 at 6:20 pm #122851
        nickrose
        Moderator
        Eventide Staff

          Please see my comments under 5.61B Test is a disaster on H8000FW. Contrary to the writer's alarmist titling, this issue is not a 5.6B feature, and also applies to 5.5.

          Apologies for our failings – we'll look into it.

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.