H8000FW Crashes

Home › Forums › Products › Rackmount › H8000FW Crashes

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • May 4, 2017 at 10:23 pm #114142
      mtclearwave
      Member

      I am getting the dreaded message “A bus error has occured.” (E12) The error numbers (20200040 and 2000A940 and 31690040) are displayed after I load up one of my  recent custom Presets in DSP A and then switch to DSP B or visa versa. It only happens with Programs I have saved (to Card) and renamed. With all other non customized Presets it does not crash. I have tried to shorten the names to see if that helps (just using letters – no numbers or other symbols) but it still crashes. What gives?

    • May 5, 2017 at 2:52 pm #146302
      nickrose
      Moderator
      Eventide Staff

      I'm guessing your card is corrupted in some way.

      First thing would be to reformat it and try again.

      If that fails, try a different card and adaptor.

      If that fails, send the card and adaptor to Eventide marked for my attention and we can have a look at it.

       

    • May 5, 2017 at 3:10 pm #146304
      mtclearwave
      Member

      Ok thanks – I will do some testing and get back to you

    • May 8, 2017 at 8:08 am #146328
      mtclearwave
      Member

      After lots of testing – I think the crashes had to do with Prests I had saved (and became corrupted) in an iPad app called Sysex Base and then loaded them back into the H8000. I tried to reproduce a crash with many new saved custom files (also using the Sysex Base app- and I haven’t had any more crashes since – thank God.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.