Orville don’t changes bank!

Home Forums Products Rackmount Orville don’t changes bank!

  • This topic is empty.
Viewing 3 reply threads
  • Author
    Posts
    • #110945
      newsound
      Member

      Hi i'm alessandro from Italy, sorry for my poor english..

      My orville don't changes bank using CC 0 .. my version is 3.002 meanwhile my manual is 3.0

      someone has the updated manual?

      Thanks

    • #124502
      nickrose
      Moderator
      Eventide Staff

      Hi Alessandro

      The V3.0 manual in the Orville Support section also covers V3.002 – there are very few differences

      For Bank Change info you should look at p.67 in the manual – note that there are a few subtleties involving channel settings. There were a few bugs with this – you may need to try various options.

      .

    • #124504
      newsound
      Member

      Hi Nick,

      I'm new with orville, i'm reading every manual pages. I'm using only A DSP with Analog A routing.

      On midi, base channel set to 5 , omni mode off. With my gordius little giant i send CC0 value 10 on midi channel 5 , but my bank don't change..

      The BUSY led lights

    • #135386
      nickrose
      Moderator
      Eventide Staff

      You should try channel 0, and alternatively with OMNI on. Like I said, there are a few issues here- I'm not sure what the actual problems were.

Viewing 3 reply threads
  • You must be logged in to reply to this topic.