I have an H8000FW that I am using on the road. It travels in a shock-mounted rack. i fired it up this afternoon before line check and midway through the boot up process it gave a message about the memory being "unprogrammed." After this message it went into a test mode (001: All Test). After returning from catering about 30 minutes later, it appeared to have cycled through the test procedure about 7 or 8 times. I powered it off and on several more times, all with the same result. i took the lid off just to see if any ribbons had wiggled loose, but everything looked great. Any suggestions? What can I do to have this unit for the show tomorrow? Thanks for any help you can send my way!