Problems Programing MIDI Tap Switch

Home Forums Products Rackmount Problems Programing MIDI Tap Switch

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • #106271
      wes
      Participant

        Hi guys, 

         

        I've been working long and hard trying to figure this out, but I just can't get it to work. I'm sure y'all can help me… I'm using 3.51 firmware.

        Using an FCB1010 controller; I have both the Eclipse and the controller on channel 2, and they're working together perfectly, except for the tap tempo. I have TAP SRC set to EXT#3. I set EXT#3 using CAPTURE, which brings up MIDI DOUBLE on control #26 (which corresponds to what I have my controller programmed to), but when I hit the MONITOR button, it just stays at 100% and won't change when I hit the footswitch. 

        Please help me figure out what I'm doing wrong!

        Thanks, 

        Wes

      • #118725
        nickrose
        Moderator
        Eventide Staff

           MIDI double seems inappropriate for a tap switch – try a different CC number.

      Viewing 1 reply thread
      • You must be logged in to reply to this topic.