Presets
Description
July 31, 2015 - 11:04 pm
The low THRESHOLD and extreme inverse compression settings (OMNI-RATIO) break up the trailing reverb in unpredictable ways. Clamp down on your notes, and you may hear long bursts of ambience, sliced & diced reflections, or nothing at all.
There's nothing natural about REVERB FRAGMENTS.
The expression pedal further decimates the reverb with pitch shifts & changing room characteristics. It can introduce subtle effects; all the way up to total chaos. The HotSwitch toggles from the instant onset of dynamic reversal, to a gradual fade-in of shattered FX.
Description
In an "empty" loop, select a maximum delay time in MAX-LENGTH (2.00 seconds here). Delay times less than this maximum can be trimmed after initial recording with the PLY-START and PLY-LENGTH controls.
Important: For the DECAY control to work correctly as delay feedback / regeneration, the Looper must be in Dub Mode (Record first to lock in the delay time, then switch to Dub).
Expression Pedal Heel: PLAYSPEED = 25
Expression Pedal Toe: PLAYSPEED = 200
With Dub Mode cycling:
* EXP PED shifts 2 OCT down, 1 OCT down, unison, and 1 OCT up & rate changes.
* PLAY switch shifts repeats forward to reverse (from current PLAYSPEED).
* DECAY fades out delays [0 = infinite feedback. 100 = single repeat.]
With Play mode cycling (hit Record switch):
* Current delay buffer contents are 'frozen' into infinite loop at current settings.
* Dry signal can continue over the top of the infinite loop.
* Hit Record switch again to revert back to the delay line configuration.
Description
Expression Pedal Heel: Rev Delay A = 500 ms.
Expression Pedal Heel: Rev Delay B = 2000 ms.
Expression Pedal Toe: Rev Delay A = 2000 ms.
Expression Pedal Toe: Rev Delay B = 500 ms.
Two reverse 4ths & 5ths recirculating loops (medium decay @ upper bandwidth limit).
Flex switch transpose entire loop structures up one octave (quickening decay time).
Active expression pedal swaps reverse delay time limits for evolving note sequences.
Description
Choppy pitch sequence. Arcade game-like.
Description
Flex switch (or Ox9 Switch 2 in my rig) is mapped to do quick momentary Octave Up and Down bends similar to the Digitech Ricochet or EHX Pitch Fork pedals. You can hear it around the 2:00 mark of this song - https://actioncamp.bandcamp.com/track/the-storm The timing right now is set for these particular moves I'm doing but easily adjustable to whatever speed rise and fall you'd like.
Description
Octaves down. Expression pedal controls 'Delay Level'.
Description
Choppy tremolo with randomized glitches.
Description
Rubberband octave pitch shifts in opposite directions. The low sensitivity on the envelope starts it glitching on lower input, long decaying notes, or with lighter picking technique.
Description
Modeled after a reverb setting from the Boss RV-2.
Description
Derya Nagle preset.
Description
This preset makes every note on the guitar sound like the “same tone.” The guitar signal is completely obscured by the ring modulator so regardless of what is played, or where it is played on the fretboard, the result is always the “same tone.” While I achieved the sound I wanted, I have no recollection of how I actually made it and it is not clear why the preset works the way it does. It sounds refreshingly unusual. Enjoy!
Description
At toe you've got no modulation, at heel your delay is drenched in filtered modulation
Description
John Schofield sound. Use an expression pedal. Heal: no chorus sound. Toe: full chorus sound.
Description
Expression Pedal Heel: Delay B = 1/2
Expression Pedal Toe: Delay B = 1/32
Unlimited rhythmic variations + octave shifts; thanks to the delay length precedence.
The Flex / Learn switch ... is useless here. Octaves are octaves. Useful w/ other intervals.
EXP PED changes the rhythm texture of the delay pair with every movement.
Delay B determines the feedback loop length, until it drops < Delay A @ 1/8 (taking over).
Description
Asdfghkl
