Presets
Description
Glitchy, broken random FX sequences.
Description
Featuring the wonderfully unique dynamic reversal of the Omnipressor. COMET TRAIL PATH is a medium room 'verb with a slow attack, and long decay. It begins to bloom between your input notes (OMNI-RATIO). The reverb is cut off by further input, and 're-triggered' by very low - or near silent - levels (THRESHOLD). A relatively short RELEASE time smooths out the tails.
The expression pedal accelerates & decelerates the comet speed as it flys by. Or ... it changes the apparent size and reflectivity of the medium room in a parked position. The HotSwitch punches in an infinite reverb, which fades away nicely over 10 seconds when unlatched. Combine both controls for hands-free manipulation of complex drones, and the accumulated wall of sound.
Description
Delay and modulation (if you use the expression pedal) plus a FREEZE effect if you press the HOTSWITCH.
Description
Subtly pulsing tremolo.
Description
Clean 4th down and 'detuned' delays.
Description
Big lead delay with boost
Description
Dissonant, arpeggiated harmony.
Description
The little seek-wah type sound around the 2:30 mark of the Deftones - Digital Bath. You could probably make a very similar patch with the Q-Wah Algorithm too with similar settings.
Description
Been playing with my Wahoo Sonuus (much recommended) and getting off on the nasty trebly resonant was sounds you can get out of it. This has a go at sticking one of those sounds onto my H9 for ease of pedal board space. A fairly crude and nasty space rock wah sound. Mainly seems to come out when jamming out mid-70s Hawkwind sounds...
Description
Update por Leandro Granatelli
Description
Rumbling 2 octave down delay.
Description
This is based on the Boss Dm-2 used by Dave Keuning of The Killers in the song "When You Were Young". Expression pedal/Hotknob controls the feedback to a controlled oscillation that doesn't drown your signal.
Description
Arp delay. Delayed 4th down and octaves down.
Description
Expression pedal activates drive and affects tone. Perfect 5th, octave, and 12th harmony arp-delay.
Description
Create a note sequencer loop from a drone input.
Fade in a sustaining note or chord for more than 2 seconds, then fade out.
Use a volume control, volume pedal, eBow, EHX Freeze, compressor, etc.
Manipulate the Pitch A & Pitch B knobs. End up at 1.000 to avoid belltree FX.
Use the mouse in H9 Control, exp. pedal, aux switches, etc. to sequence pitches.
Expression Pedal Heel: Pitch A = 1.000
Expression Pedal Heel: Pitch B = 1.000
Expression Pedal Toe: Pitch A = 0.749
Expression Pedal Toe: Pitch B = 1.498
Hit the Repeat switch for stuttering pitches within the note sequence.
Bring one or both Feedback controls to 0 to chop out parts of the sequence.
Feedback to zero for more than 2 seconds clears one or both note sequences.
Changing Pitch Cntrl to Micro or Normal adds microtonal components to the loop.
Add glitching artifacts and hesitations by changing Type to an H9xx model.
Bypass (with DSP FX setting) "freezes" the sequence from additional input.